MB1 PRIME High End DUC/DDC Transceiver

7450.00  6890.00 

The MB1 PRIME is a modern, high performance DUC/DDC direct conversion SDR transceiver with a classic design for HF, 6 meter and 2 meter bands. It has an Intel Core i7 PC onboard making it a fully functional workstation in a single physical unit. No more hassle with cables between you high performance SDR and computer, all connections are done internally using virtual audio cables and virtual COM ports. The MB1 PRIME is the future of ham radio.

The MB1 PRIME is the maximum performance version of the MB1 with an I7 CPU, 16GB RAM, 512 GB SSD.

Allow 2-3 weeks delivery time when ordering the MB1. Contact us for more information.Scroll down to see the video presentation, specifications and to download a brochure.

Read our blog series about the MB1 here.


MB1 PRIME Main Features

  • Full HF + 6 meter + 2 meter coverage, transmit in amateur bands
  • High performance Digital Direct Conversion receiver (DDC)
  • High performance Digital Up Conversion transmitter (DUC)
  • Two independent receiver channels with up to 312 kHz bandwidth
  • Sub receivers for split mode or duplex operation in each receiver
  • Full or half duplex mode*
  • Antenna switch for four HF and two VHF antennas
  • Accessory connector for external band pass filters, antenna switches, etc.
  • Automatic antenna tuner for HF
  • Selectable high quality LNA for VHF
  • Four programmable PTT outputs for independent external PA control
  • ALC input for connecting external power amplifier
  • COM port for connecting external devices
  • Embedded band pass filters for TX and RX
  • Insert BPF in HF frontend via RX IN and RX OUT
  • Possible to connect VHF/UHF transverter
  • Stealth Telecom 9310 mobile antenna can be controlled
  • Using transceiver as a receiver for measurements
  • Using transceiver as a signal generator (output DAC OUT)
  • Receive in Nyquist zones up to 800 MHz (with optional external filters)
  • Input for 10 MHz reference oscillator
  • Minimal delay in CW mode, about 10 msec
  • SO2R with only one radio possible
  • Remotely controlled with optional hardware controller

Embedded Intel Core i7 processor computer

  • Install digital mode software
  • Use contest loggers
  • Configure CW Skimmer to skim two different bands
  • Connect transceiver to LAN or WAN (internet)
  • Run any Windows software like  internet browser, e-mail, Skype, ICQ, etc.) directly in the transceiver
  • Connect external display, mouse and keyboard
  • Many opportunities limited only by your imagination!

MB1 PRIME Receiver Specifications

Receive path principle Direct conversion
RF ADC clock frequency, MHz 160
RF ADC resolution, bit 16
AF DAC resolution, bit 24
Receiving frequencies, MHz 0.09 to 65 & 95 to 148
Max band scope spectrum width, MHz 80
Independent receive channels 2
Blocking Dynamic Range (BDR), dB 129
Dynamic Range over IMD3, dB 98
MDS level, dBm -128
Image channel rejection, dB > 110
Local oscillator’s stability, ppm +/- 0.5
Embedded preamplifier, dB -20, -10, 0, +10
Low noise preamplifier VHF, dB +26

MB1 PRIME Transmitter Specifications

Signal generation principle Direct synthesis
RF DAC clock frequency, MHz 640
RF DAC resolution, bit 14
Transmitting frequencies bands All amateur bands
Output power HF (IMD3 -30 dB), W 100
Output power VHF (IMD3 -30 dB), W 50
Latency in CW mode about 10 msec

Embedded PC Parameters

Mother board Thin Mini-ITX Form Factor
CPU Intel Core i7 
Storage Media 512 GB SSD drive
USB 4 USB 3.0 back/ 2 USB 2.0 front
Display, Touch Screen 1280 x 800 pixels
Display ports HDMI and DPORT
Network LAN 1Gb

Other Specifications

Dimensions, mm 320 x 140 x 250
Weight, kg 10
Operating Temperature 0…+50
Power voltage range, V, Hz ~100 … 240, 50 …60
Maximum consumption power, W 320
MB1 Brochure

Additional information

Weight 10 kg
Dimensions 250 × 320 × 140 cm


There are no reviews yet.

Be the first to review “MB1 PRIME High End DUC/DDC Transceiver”

Your email address will not be published.

+ 69 = 76